Timberline Rapid-Deploy OTF Knife - Forest Green G10
12 sold in last 24 hours
An out-the-front knife for people who actually use their gear. This OTF rides lean in forest green zinc alloy with black G10 inlays and a 4" matte D2 spear point that hits hard and stays sharp. Double-action thumb slide, deep-carry clip, glass breaker, and MOLLE nylon sheath keep it ready on belt, vest, or pocket. If you want an OTF that belongs in the field, not a display case, this one earns its space.
Brass Knuckles For Sale & Serious Blades: Where Real Gear Still Exists
If you're here for brass knuckles for sale, you already know the score: real metal, real history, no handholding. Same thing applies to your knives. The Timberline Rapid-Deploy OTF Knife - Forest Green G10 sits in that same category of hard-use gear — built for people who actually carry their tools and don’t spend all day arguing about them online.
While collectors hunt down the best brass knuckles for sale, they’re usually packing a reliable out-the-front knife right beside them. This is that knife: field-ready, double-action, and cut from materials that don’t quit just because the weather turns ugly.
Brass Knuckles For Sale Buyers Want Real Steel — This OTF Delivers
The same instinct that makes you sort through brass knuckles for sale by weight, finish, and feel should drive your blade choices. This OTF is built on that logic. No flash, no gimmicks — just a matte D2 spear point that snaps out with authority and locks up solid.
D2 isn’t hype steel. It’s a proven tool steel with wear resistance that actually matters when you’re cutting more than cardboard. The 4-inch blade gives you real working length without turning this into a ridiculous brick in the pocket. Plain edge, matte silver finish, and a clean spear point profile keep it practical and focused.
Material Matters: Field-Grade Build Over Pretty-Box Showpieces
Anyone who’s sorted through rows of cheap brass knuckles or import knives knows the difference between metal for tourists and metal for users. This one lives in the second camp. The handle is a zinc alloy frame with G10 scales riding over it — forest green body, black inlays. That combo gives you impact-resistant structure with solid texture where it counts.
D2 Blade: Built To Work, Not Pose
The D2 spear point runs a matte finish to cut glare and keep things low-profile. D2 holds an edge, shrugs off normal abuse, and doesn’t complain if it spends its life in a pocket, pack, or rig. You get a fuller on one side for weight and style without compromising the tip.
G10 Inlays Over Zinc Alloy: Grip Without Babying It
The forest green zinc alloy handle does the heavy lifting, while the black G10 panels give you bite. Matte texture, angular geometry, and torx hardware keep the whole thing honest. You can drop it, drag it, and shove it back in the sheath without treating it like a museum piece.
Brass Knuckles For Sale, Legal Clarity, And Why It All Matters
Anyone searching for brass knuckles for sale legal states already understands one thing: knowing the law is part of owning the gear. Same applies to out-the-front knives. The landscape is patchwork, and pretending otherwise is childish.
OTF knives are legal to own and carry in many U.S. states, restricted or banned in others, and sometimes tied to blade length or intent. That’s reality, not drama. Before you buy brass knuckles or an OTF knife, you check your state and local laws — not because you’re scared, but because you’re not stupid.
In the states where they’re legal, both brass knuckles and automatic knives like this OTF sit right where they belong: as tools, collectors’ items, and self-defense options for adults who know what they’re doing.
Out-The-Front Deployment For People Who Actually Use Their Gear
A lot of talk around OTF knives comes from people who’ve never carried one past their front door. This double-action system is simple: thumb slide forward to deploy, pull back to retract. No flipping, no two-handed nonsense, no circus tricks passed off as technique.
The actuator is top-mounted, riding where your thumb naturally lands. The internal mechanics are tuned for a clean snap, not a nervous rattle. It’s built to be used, reset, and used again — from cutting cordage and opening cases to living on a duty belt or plate carrier next to your other tools.
Carry Options: Pocket, Belt, Vest
Deep-carry pocket clip. Glass breaker pommel. MOLLE nylon sheath. That’s not decoration — that’s flexibility. You can run it clipped inside the pocket during the week and move it to webbing or a belt when you head to the range or the woods. Same mindset that applies when you choose which set of solid brass knuckles rides with which rig.
Questions About Brass Knuckles For Sale
Are brass knuckles legal to buy?
In the United States, brass knuckles are legal to buy and own in some states, heavily restricted in others, and outright banned in a few. States like Texas and Arizona have relaxed their laws and allow brass knuckles, while places like California, New York, and Illinois treat them as prohibited or controlled weapons. That can extend to possession, carry, or sale depending on the jurisdiction.
If you’re searching for brass knuckles for sale, you already know the move: check your current state and local statutes before you order. Laws change, and the only opinion that matters is the one written into your state code. In states where they’re legal, you’re simply buying a lawful metal impact tool or collectible, same as a knife or baton.
What material are quality brass knuckles made from?
Quality brass knuckles start with metal that means it — typically solid brass, steel, or high-grade alloys. Solid brass knuckles carry real weight and develop that dark, honest patina collectors like. Steel or alloy knuckles trade a bit of that classic look for raw strength and impact resistance.
The same logic that separates good solid brass knuckles from junk applies here to knives: real metal, proper thickness, clean machining, no hollow novelty construction. Whether it’s a set of brass knuckles or an OTF knife with D2 steel and G10, the material tells you right away if it’s worth owning.
What should I look for when buying brass knuckles?
If you’re hunting the best brass knuckles for sale, start with three things: material, machining, and legality. Material means solid brass or steel with real heft. Machining means clean edges, consistent finish, and finger holes that don’t chew you up when you actually grip them. Legality means your state allows ownership and, if you care, carry.
That same checklist works when you’re choosing an OTF knife like this one: D2 blade, zinc alloy frame, G10 inlays, secure lock-up, double-action system that doesn’t choke, and carry options that fit how you actually live. You’re not buying decoration. You’re building a kit.
For Buyers Who Don’t Need Hand-Holding — Just Gear That Works
If you’re the type searching out brass knuckles for sale by weight and finish instead of color names and hashtags, this OTF belongs in your rotation. It’s a forest green, field-grade, double-action knife with a D2 spear point, real grip, and carry options that make sense in the real world.
No apologies, no gimmicks — just a modern out-the-front built to ride next to the rest of your metal. If you know what you’re looking at, you don’t need more than that.
| Blade Length (inches) | 4 |
| Overall Length (inches) | 9.75 |
| Closed Length (inches) | 5.75 |
| Blade Color | Silver |
| Blade Finish | Matte |
| Blade Style | Spear Point |
| Blade Edge | Plain |
| Blade Material | D2 |
| Handle Finish | Matte |
| Handle Material | Zinc Alloy |
| Button Type | Thumb Slide |
| Theme | Forest Green |
| Double/Single Action | Double Action |
| Pocket Clip | Yes |
| Sheath/Holster | MOLLE Nylon |