Crimson Kiss Pop-Art Butterfly Knife - Matte Black
5 sold in last 24 hours
Brass knuckles for sale aren’t the only hardware with attitude. This Crimson Kiss pop-art butterfly knife pairs a two-tone 440C stainless Japanese tanto blade with matte black steel handles and a bold red lips graphic. At 9 inches open and just under 6 ounces, it flips with purpose, locks with a T-latch, and rides solid in the hand. You’re buying a real balisong with real build quality from a real dealer — not wall décor.
Brass Knuckles For Sale, Balisongs That Match The Attitude
If you’re hunting brass knuckles for sale, you already know the appeal of metal that hits hard and looks right. The same mindset applies to this piece. The Crimson Kiss Pop-Art Butterfly Knife doesn’t apologize, doesn’t pretend to be cute. It’s a 440C stainless Japanese tanto blade riding on matte black steel handles with a red lips graphic that turns heads before the first flip.
Open length is 9 inches, closed at 5.375 inches, with a 4-inch two-tone blade and just under 6 ounces of steel in your hand. This is for buyers who like their brass knuckles and their butterfly knives the same way: solid, unapologetic, and built to be used, not babied.
Brass Knuckles For Sale Mindset, Butterfly Knife Execution
People who search brass knuckles for sale aren’t looking for toys. They want metal with presence and purpose. This butterfly knife lives in that same lane. The Japanese tanto profile gives you a hard, angular tip and a straight edge that actually cuts, not just poses for photos. The two-tone finish — silver edge, black spine — draws the eye along the blade, then right back to the red lips stamped on the handle.
Dual tang pins keep the alignment true. The T-latch locks it down clean. Torx hardware means you can actually tune and maintain the action instead of throwing it away when it loosens. This is everyday flip gear with enough attitude to share case space with your favorite brass knuckles.
Material-Driven Build Quality That Earns Its Place
Collectors buying brass knuckles for sale look at metal first, story second. Same rule applies here. The blade is 440C stainless steel — not mystery pot metal. It holds an edge, shrugs off daily carry, and resists corrosion if you treat it with basic respect. The Japanese tanto geometry gives you a purposeful point, strong tip, and a cutting edge that stays useful.
440C Stainless Steel Two-Tone Blade
The two-tone finish isn’t just decoration. The contrast between the polished edge and the blacked-out spine gives you fast visual reference when opening and closing, especially under low light. That plain-edge grind lets you sharpen it on any decent stone or system without wrestling with serrations or gimmicks.
Matte Black Steel Handles With Pop-Art Lips
Steel handles, matte black, clean cutouts, and a single red lips motif. That’s it. No fake carbon fiber, no plastic shells pretending to be something they’re not. Steel gives you real weight — 5.94 ounces — so the knife tracks predictably through rollovers, fans, and standard balisong drills. The red lips graphic is pure pop-art: one bold hit of color on an otherwise tactical frame, for the same sort of visual punch that custom brass knuckles engravings give.
Legal Mindset: Same Straight Talk As Brass Knuckles For Sale Legal States
If you’re the type searching brass knuckles for sale legal states, you understand how patchwork American weapon laws really are. Butterfly knives live in that same maze. Some states treat them like any folding knife. Others restrict carry, and a few still cling to outdated bans. That’s reality.
We’re not here to handhold or moralize. We’re here to sell legal product to adults who can read their own state and local codes. This Crimson Kiss balisong ships where it’s legal to own and buy. You decide how and where you carry it. Same straight deal as when you buy brass knuckles: know your jurisdiction, then pull the trigger on the gear you want.
From Display Case To Daily Flip: Why This Piece Works
This knife isn’t a safe queen unless you choose to make it one. At 4 inches of blade and a 5.375-inch closed length, it fits the standard balisong footprint, which means holsters, rolls, and pouches that fit traditional butterfly knives will work here too. The weight is heavy enough for controlled spins, light enough not to drag your pocket.
Pop-art red lips on black steel means it doesn’t vanish into your collection. Put it next to bare metal brass knuckles, black OTF knives, and stonewashed folders and it still draws the eye. That’s the point: you’re not buying generic hardware; you’re adding one loud note to an otherwise serious line-up.
For Collectors Who Actually Use Their Gear
This is built for the person who flips at the workbench, not just photographs on a velvet mat. Tang pins, T-latch, Torx hardware — all serviceable, all replaceable if you’re the type who likes to tune. The finish is matte, not glossy, so fingerprints and minor wear don’t ruin the look. It ages the way good metal should: slowly and honestly.
Questions About Brass Knuckles For Sale
Are brass knuckles legal to buy?
In the U.S., brass knuckles are legal to buy in several states, completely banned in a few, and sit in a gray zone in others where possession or carry, not purchase itself, is the main issue. States like Texas, Montana, and Arizona have loosened restrictions, while places such as California, New York, and Illinois remain far more hostile. Laws change, and local ordinances matter. If you’re looking for brass knuckles for sale, you check your state and city codes before you buy — same way you’d confirm butterfly knife legality where you live.
What material are quality brass knuckles made from?
Serious brass knuckles are usually made from solid brass, steel, or high-grade aluminum. Solid brass knuckles carry weight and hit with authority; steel knuckles offer extreme durability and a slightly different balance; aluminum keeps the dimensions without the mass. The same logic drives this Crimson Kiss butterfly knife: 440C stainless steel for the blade, steel for the handles, real hardware. If a seller won’t tell you the metal, you don’t need the product.
What should I look for when buying brass knuckles?
When you buy brass knuckles, you look at three things: metal, machining, and legality. Solid brass or steel, clean edges, comfortable fit for your hand, and a seller who’s straight about where they’ll ship. Translate that here and the checklist holds: 440C stainless blade, steel handles, clean hardware, and dimensions listed in plain English. You’re building a collection of metal that actually deserves the space it takes up — no filler, no guesswork.
Buy With The Same Confidence You Bring To Brass Knuckles For Sale
If your search history is full of brass knuckles for sale and tactical hardware, this Crimson Kiss Pop-Art Butterfly Knife fits your lane. Two-tone 440C stainless, matte black steel handles, 9 inches of honest balisong with a red lips graphic that doesn’t whisper. It’s built to flip, built to last, and sold by people who know the difference between collectors and tourists. Add it to the cart, add it to the rotation, and let the rest of your gear catch up.
| Blade Length (inches) | 4 |
| Overall Length (inches) | 9 |
| Closed Length (inches) | 5.375 |
| Weight (oz.) | 5.94 |
| Blade Color | Silver |
| Blade Finish | Two-tone |
| Blade Style | Japanese Tanto |
| Blade Edge | Plain |
| Blade Material | 440C stainless steel |
| Handle Finish | Matte |
| Theme | Lips |
| Latch Type | T-latch |
| Is Trainer | No |